RX-600e/ex
Roadtec
The RX-600e/ex is a 620 horsepower cold planer available with 4-track assemblies or optional 3-track assemblies. This lighter weight versatile machine allows contractor to cut up to 13” (330 m) deep with width of 6'3" (1.9 m), 6'7" (2 m), or 7'2" (2.184 m). The RX-600e is light and maneuverable for urban situations. A two-stage front loadout conveyor, with 60° swing to either side, provides ample loading capacity.
Features & Benefits
FRAME
We are the only manufacturer to use A656 Grade 80 steel throughout the frame. This special grade of steel has twice the strength of the mild steel that is commonly used.
BOLT-ON TRACK PADS STANDARD
Roadtec offers bolt-on track pads standard because it saves the customer money. Now when your track pads wear out you can simply unbolt the old ones and bolt-on new ones, saving you precious time. No more changing grousers and wasting them.
DUAL WATER SPRAY BARS
Roadtec milling machines have two independent spray bars to inject water in the cutter housing. The front spray bar is primarily for dust suppression, the rear spray bar cools the drum.
SECONDARY CONVEYOR SWING
All Roadtec milling machines offer 60 degree conveyor swing, allowing you to easily feed a truck in an adjacent lane or around a tight bend such as in a cul-de-sac.
THREE TRACK OR FOUR TRACK
Both three track and four track configurations have benefits, so why be forced into one way or the other? Roadtec gives you a choice.
FOLDING CONVEYOR
A folding secondary conveyor is available on all Roadtec Milling Machine models to aid in transport and loading.
