The BXR150 hydraulic breaker, at 15,000 foot-pounds, is designed for rugged, continuous duty and offers an extra- long-stroke design which improves the power-to-weight ratio. This provides a wide carrier range (120,000 to 220,000 pounds), and precise tolerances between the piston and cylinder, allowing high efficiency, blow rate and power. Plus, large cross-section upper and lower shock absorbing isolators reduce vibration feedback to the carrier. BTI’s exclusive front-head-restraint system tightly guides the front head within the housing, reducing loading to the tie rods and the upper portion of the breaker. A narrow box housing design is well suited to tight conditions.
The working weight of the BXR150 is approximately 12,000 pounds and flow range is 85 to 120 gpm. The operating pressure is 2,030 to 2,755 psi, and the frequency range is 260 to 425 bpm in long stroke mode (high impact) and 340 to 530 in short stroke mode (high frequency).
The working weight of the BXR150 is approximately 12,000 pounds and flow range is 85 to 120 gpm. The operating pressure is 2,030 to 2,755 psi, and the frequency range is 260 to 425 bpm in long stroke mode (high impact) and 340 to 530 in short stroke mode (high frequency).
Company info
PO Box 130
35 Elgin Street
Thornbury, ON
CA, N0H 2P0
Website:
astecindustries.com
Phone number:
519-599-2015
